OVS=X16
Control Register
SYNC | USART Synchronous Mode |
LOOPBK | Loopback Enable |
CCEN | Collision Check Enable |
MPM | Multi-Processor Mode |
MPAB | Multi-Processor Address-Bit |
OVS | Oversampling 0 (X16): Regular UART mode with 16X oversampling in asynchronous mode 1 (X8): Double speed with 8X oversampling in asynchronous mode 2 (X6): 6X oversampling in asynchronous mode 3 (X4): Quadruple speed with 4X oversampling in asynchronous mode |
CLKPOL | Clock Polarity |
CLKPHA | Clock Edge for Setup/Sample |
MSBF | Most Significant Bit First |
CSMA | Action on Slave-Select in Master Mode |
TXBIL | TX Buffer Interrupt Level |
RXINV | Receiver Input Invert |
TXINV | Transmitter Output Invert |
CSINV | Chip Select Invert |
AUTOCS | Automatic Chip Select |
AUTOTRI | Automatic TX Tristate |
SCMODE | SmartCard Mode |
SCRETRANS | SmartCard Retransmit |
SKIPPERRF | Skip Parity Error Frames |
BIT8DV | Bit 8 Default Value |
ERRSDMA | Halt DMA on Error |
ERRSRX | Disable RX on Error |
ERRSTX | Disable TX on Error |
SSSEARLY | Synchronous Slave Setup Early |
BYTESWAP | Byteswap in Double Accesses |
AUTOTX | Always Transmit When RX Not Full |
MVDIS | Majority Vote Disable |
SMSDELAY | Synchronous Master Sample Delay |